Checked August 2026. Figures below are taken from Dubverse's own published pricing and product pages on that date. Terms change often — verify before deciding.
Dubverse has the cheapest plan on this side of the market: $18 a month, against EasilyAI's $50. If the decision stops at the plan price, it is already made.
It should not stop there, because a plan is not a quantity of work. Read Dubverse's two numbers together and the entry tier buys twelve and a half minutes of dubbing — which makes each of those minutes cost more than a minute on EasilyAI, not less.
The $18 plan and what it actually buys
Dubverse Pro is $18 a month with 50 credits. Supreme is $30, also with 50 credits. Both charge the same rates: 4 credits per minute of dubbing, 2 per minute of AI voice generation, 1 per minute of subtitling.
Fifty credits at four credits a minute is 12.5 minutes of dubbing a month. The "up to 60 mins of video" printed beside Pro is the length of file you may upload — a ceiling, not an allowance. Two different numbers doing two different jobs, sitting next to each other on the same card.
Work it through:
- Dubverse Pro — $18 ÷ 12.5 minutes ≈ $1.44 per finished minute
- Dubverse Supreme — $30 for the same 50 credits ≈ $2.40 per finished minute
- EasilyAI — $50 carries 1,135 credits at 25 credits a minute ≈ 45 minutes, or about $1.10. Supply the transcript and translation and dubbing drops to 10 credits a minute, or about $0.44.
So the cheapest plan on the page is not the cheapest minute on the page. It is the cheapest commitment, which is a different thing and a legitimate one — as long as you know which you are buying.
The Supreme tier is worth a second look for the same reason. It costs $12 more than Pro and gives exactly the same 50 credits. You are paying for voice cloning, priority processing and GPT-4 translations, not for more work.
What sits behind which tier
Two capabilities are gated on Dubverse, and both are ones you notice on a real project.
Voice cloning is Supreme only. On EasilyAI it is available from any balance, including a $10 top-up, and adds 8 credits per minute.
Translation quality is tiered by model. Pro runs what Dubverse calls Hawk translations, on GPT-3.5; Eagle translations, on GPT-4, arrive at Supreme. So the $18 plan translates with a model two generations behind the one on their own top tier — and the translation is the part that decides whether a dub is worth publishing at all. A perfect voice reading a wrong sentence is a wrong sentence.
EasilyAI does not tier the translation engine by plan. Everyone runs the same current-generation model, from a $10 top-up to Studio. Translation Deluxe costs 18 credits a minute, or 14 if you bring the transcript, and what it produces does not change because you are on a cheaper plan.
That is worth checking on any platform you are comparing, because it is rarely on the pricing page: is the translation I get on the entry plan the same translation the top plan gets? On Dubverse, published answer, no.
The length ceiling
Dubverse caps single-video length by plan: 60 minutes on Pro, 150 on Supreme. Enterprise is unstated.
For short-form that is irrelevant. For a podcast episode, a webinar, a lecture or a long interview it is a wall — and unlike an allowance, you cannot buy your way past it on the same tier.
EasilyAI has no cap on video length on any plan. A two-hour episode goes through as one file, with cross-talk kept as separate lines.
Where the catalogues differ
Dubverse is built in India and says so proudly — its own site describes maintaining a consistent voice across "10+ Indian and global languages", with Hindi, Hinglish and Indian-accent delivery front and centre, and 200+ customizable AI voices. If your primary market is India, that focus is a real advantage and you should weigh it heavily.
EasilyAI documents 80+ languages with a dedicated voice, each in two tiers — Standard for the accent most projects need, Deluxe for city and region level:
- Spanish — nine accents: Mexican, Colombian, Castilian, Argentine (Rioplatense), Chilean, Peruvian, Venezuelan, US Spanish, Ecuadorian.
- Arabic — thirteen dialects, from Egyptian and Levantine to Omani, Palestinian and Iraqi.
- English — American, British, Indian, Australian, Canadian, Nigerian and South African, plus Indian, Australian, Canadian, South African and Yorkshire on Deluxe.
- South Asian — Hindi alongside Bengali, Tamil, Telugu, Marathi, Gujarati, Kannada, Malayalam, Punjabi, Urdu and Nepali. The South Asian guide covers them.
The full index lists every one, which is the point: the breakdown is published, so you can check your market before paying.
What happens after the dub exists
Dubverse includes an editor, AI subtitles and a two-day free trial with no card. EasilyAI's editor is built for the case where the video is not one person talking cleanly to camera:
Approve each stage before it spends your credits. The pipeline stops between stages. After transcription you review the segments — text, speakers, timecodes — and correct them while correcting them is free; only then does translation run, on a transcript you approved. The translation stops the same way, before a single credit goes on audio. With a 12.5-minute monthly allowance, one wasted regeneration is a tenth of your month.
Overlapping speech stays overlapping. Two people talking over each other remain two separate lines with overlapping timecodes and their own voices, each held inside its own duration so a line is neither clipped short nor left running over the next.
Bring the script as a spreadsheet. Import a translated script as a CSV and the whole thing lands on the timeline already segmented — and it drops the dub from 25 credits a minute to 10.
Your music and effects, intact. Upload the stems separately and the platform mixes them into the dub instead of handing you a bare voice track.
Masters that meet spec. Every export is mixed to the standard the destination expects — YouTube 24-bit and 16-bit, Apple TV+, Netflix, Disney+, Paramount+, Amazon PV, cinema — with integrated loudness in LUFS and a true-peak ceiling set per platform. Nothing to reopen in Pro Tools, Audition or Resolve.
Subtitles from the same timeline. An SRT alongside the audio, built to professional subtitling parameters, so the captions agree with what is being heard.
Review without exporting. A shareable link per draft, with notes against the exact timestamp. Fifteen collaborators, no per-seat charge.
Why the cheapest plan can be the costliest minute
A low monthly price and a low cost per finished minute are different things, and the gap between them is regeneration.
An error in the transcript propagates into the translation and hardens into the voice. Discover it after the audio exists and you pay for all three stages again — the transcription that was correct, the translation that inherited the fault, and the audio that made it permanent. It was free to fix at step one and expensive at step three.
EasilyAI stops after transcription so segments, speakers and timecodes can be corrected while that costs nothing, and stops again after translation before a credit goes on audio. On a platform that runs end to end, the equivalent review is watching the finished file and starting over — and on a plan with a tight minute allowance, those are minutes you have already bought.
That is the arithmetic behind a cheap plan producing an expensive minute: the headline rate assumes every job is right the first time, and dubbing jobs frequently are not.
What the finished track carries
Loudness mastering. Generated voices arrive at whatever level the model produced. Published beside your original audio, or on a platform that normalises loudness, that mismatch is what makes a dub sound bolted on. Getting both tracks onto the same target is an audio-engineering step, not a toggle.
Music and effects stems. If the dub replaces the whole audio bed, your intro music and sound design go with the original voice. Mixing the new voice over the retained stems is the difference between a dubbed video and a voiceover on top of silence.
Subtitles as a by-product. Transcript and translation already exist when the audio is generated, so SRT export costs nothing extra and carries professional timing and reading-speed parameters — ready for YouTube or an edit suite.
Overlapping speech stays separate. Interviews and podcasts collapse into a single queue if cross-talk is flattened into one line. Repairing that after the voices exist means paying for the audio twice.
Credits top up from $10 with no subscription, which is enough to run one real video end to end and compare finished tracks instead of pricing pages. The pipeline breakdown shows where every credit goes.
Where Dubverse is the better answer
The lowest possible monthly commitment. Eighteen dollars is eighteen dollars. If you dub one short video a month and the plan price is what has to fit your budget, that is a fair reason and no amount of per-minute arithmetic changes it.
A free trial with no card. Two days, nothing to enter. EasilyAI has no free tier — the cheapest way in is a $10 credit top-up, which is real money even if it is not much.
India first. A product built around Indian languages, Hinglish and Indian-accent delivery, by a team in that market. If that is your audience, weigh it seriously.
Which one fits
Dubverse fits occasional short videos on the smallest possible budget, and Indian-market content in particular.
EasilyAI fits when the volume is real and the deliverable is finished: accents chosen for the country, cross-talk intact, your score mixed back in, a master that passes each platform's spec, no ceiling on length, and a pipeline that lets you catch a mistake before you have paid to generate it three times.
The honest summary is that these two are not competing for the same month. One is the cheapest way to dub a little. The other is the cheaper way to dub a lot. The pipeline breakdown shows where each credit goes, and credits top up from $10 with no subscription if you want to compare the output before deciding.
Side by side
| EasilyAI | Dubverse | |
|---|---|---|
| Cheapest way in | $10 credit top-up, no plan | 2-day free trial, then $18/mo |
| Entry plan | $50/mo | $18/mo |
| Dubbing included at entry | About 45 minutes | 12.5 minutes (50 credits at 4/min) |
| Roughly, per finished minute | ~$1.10, or ~$0.44 with your own script | ~$1.44 on Pro, ~$2.40 on Supreme |
| Video length cap | None | 60 min on Pro, 150 on Supreme |
| Voice cloning | Any balance, +8 cr/min | Supreme tier only |
| Translation engine tiered by plan | No — same current-generation model on every plan | GPT-3.5 on Pro, GPT-4 on Supreme |
| Languages with a dedicated voice | 80+, in two accent tiers | 10+ Indian and global; 200+ voices |
| Published accent breakdown per language | Yes — 9 Spanish, 13 Arabic, 13 English | Not published |
| Approve each stage before it spends credits | Yes | Not published |
| Overlapping speech kept as separate lines | Yes | Not published |
| Import a translated script as a CSV | Yes — and it halves the credit cost | Not published |
| Music and effects stems mixed in | Yes | Not published |
| Loudness mastering per platform | 8 standards, LUFS and true peak | Not published |
| Subtitle export | SRT, professional parameters | AI subtitles, 1 credit/min |
| Timestamped review links | Yes | Not published |
| Seats included | 15 | Not published |
| Free tier | No | 2-day trial, no card |
If you are weighing up more than these two, the wider comparison covers Maestra and Rask AI, and the DittoDub page covers YouTube channels specifically.
Questions people ask
Is Dubverse cheaper than EasilyAI?
The plan is; the minute is not. Dubverse Pro is $18 a month with 50 credits, and dubbing costs 4 credits a minute — so the entry plan carries 12.5 minutes, or roughly $1.44 per finished minute. Supreme is $30 for the same 50 credits, about $2.40 a minute. EasilyAI’s $50 plan carries 1,135 credits at 25 credits a minute, roughly 45 minutes or about $1.10, dropping to about $0.44 when you supply the transcript and translation. Dubverse is the cheapest commitment; EasilyAI is the cheaper minute.
What does the "up to 60 mins of video" on Dubverse Pro mean?
It is the maximum length of a single file you may upload, not the amount you may dub. The dubbing allowance is the 50 credits, and at 4 credits per minute that is 12.5 minutes a month. The two numbers sit next to each other on the same plan card and answer different questions. Supreme raises the upload ceiling to 150 minutes but keeps the same 50 credits. EasilyAI has no cap on video length on any plan.
Does Dubverse include voice cloning?
On the Supreme tier at $30 a month, not on the $18 Pro tier. Translation quality is tiered the same way: Pro uses GPT-3.5 translations and GPT-4 arrives at Supreme. On EasilyAI, voice cloning is available from any balance including a $10 top-up and adds 8 credits per minute, and the translation engine is not tiered by plan — everyone runs the same current-generation model, so the translation you get on a $10 top-up is the translation a Studio customer gets.
Which is better for Hindi and Indian languages?
Dubverse is built in India and centres its product on Indian languages, Hinglish and Indian-accent delivery, so for an Indian-market audience it deserves serious weight. EasilyAI covers Hindi alongside Bengali, Tamil, Telugu, Marathi, Gujarati, Kannada, Malayalam, Punjabi, Urdu and Nepali, each with a dedicated voice and a published accent breakdown, within a pipeline that adds stem mixing, loudness mastering and no length cap.